About me :

I am a M.Sc. graduate in mechanical engineering, majored in manufacturing and production, department of mechanical engineering, Isfahan University of Technology (IUT),Isfahan, Iran. My M.Sc. thesis was to design and manufacture a new head for Ultrasonic Cold Forging (UCF) machine tools to reach inner surface of metallic cylinders. The UCF head includes transducer, booster, horn and tool. A new set of booster, horn and tool was designed and optimized in mechanical softwares. Afterwards, the UCF head was manufactured and assembled to the UCF machine tool. UCF process is utilized to nano-crystallize and improve mechanical and metallurgical properties of metallic surfaces. On the next level, the results for a UCF-subjected Al 6061-T6 cylinder was exerted which showed great reduction in surface and near-the-surface grain size (Nano-scale on the top surface layer) along with improved hardness (substantial hardness improvement at the surface, and gradual hardness reduction by moving away from the surface, finally reaching a depth in which it equals to the smae hardness before treatment) and improved wear properties of the surface (lower coefficient of friction, reduction of wear amount, reduction of roughness number). I also cooperated with other members in our research group who also worked on the same family of surface treatments (in general Ultrasonic Surface Nano-crystallization or Ultrasonic Nanocrystal Surface Modification). We also designed and manufatured another head mounted on UCF machine tool to apply treatment on flat surfaces or outer surface of cylindrical parts. The same results as Al 6061 were exerted and reported for AISI S1, AISI 4130 and 316 stainless steel. Nowadays, I am busy writing a couple of papers on our mechanical/metallurgical researches. I have also been workimg as designer, draftsman and industrial consultant in Matin Kimia Co., Jei Industrial Zone, Isfahan, Iran, since 2013. Matin Kimia Co., founded 1994, is one of leading companies in automotive industry which produces plastic, rubber and metal-rubber products for Saipa Group, IKCO and Pars Khodro Co, three giant automaker companies in Iran.

Educations :

Isfahan University of Technology (IUT), Isfahan, Iran

Master of Science, Mechanical Engineering.

Thesis: Extending Ultrasonic Cold Forging (UCF) Machine Tool for Nanostructured Surface Formation Inside the Cylinders

Advisors: Dr. Saeed Behbahani, Dr. Fathallah Karimzadeh


Isfahan University of Technology (IUT), Isfahan, Iran

Bachelor of Science, Mechanical Engineering.

Thesis: Reverse Engineering and Mass Production of Malleable/Grey Iron Pipe Fittings

Advisor: Dr. Mohsen Badrossamay


Research Interests :

  • Micro/Nano-Mechanics & Fabrication
  • Biomechanics & Bioengineering
  • Advanced Manufacturing
  • Laser-Aided Manufacturing
  • Additive Manufacturing
  • Engineering Management
  • Industrial Automation
  • Surface Engineering &Tribology
  • Mechanics of Materials
  • Computer Integrated Manufacturing
  • Fexible, Lean & Agile Manufacturing
  • Supply Chain Management
  • Production Plannig
  • Enterprise Resource Planning
  • Life Cycle Engineering